Fasteners

Fasteners

Nailing or stapling down wood floors is the most common installation method. The process involves nailing or stapling the wood flooring directly to a wood subfloor. Typically, the flooring is blind nailed through the tongue into the wooden subfloor so that the nails are not visible after the flooring is installed. This installation method works for solid and engineered and some bamboo wood floors, domestic and exotic, but only for wood subfloors.

Cleats

Specifically designed for the application of hardwood flooring, Primatech steel cleats are ideal for fixing various types of wood strips or planks to bases such as plywood or joists.

Each cleat features a sharp set of barbs on each side to provide just the right amount of holding power.

This design allows floors to expand and contract with seasonal cycles, thereby preserving their integrity and providing a lifetime of performance.

  • Collated tape to hold nails together and eliminate wastedue to break-up
  • Sturdy steel that won’t bend, even after multiple hits

Cleat nails minimize wood splitting and still allow for expansion and contraction of flooring material.

“L” 16ga
For 1/2″ to 33/32″ (12 mm to 26 mm) tongue and groove flooring.

L16ga

Compatible with Primatech models

  • 250AL, 250FL, 245FL, 240FL, 210FL, 330L, 300L, 100
2″ Box
1,000
Case
5,000
1 ¾” Box
1,000
Case
5,000
1 ½” Box
1,000
Case
5,000

“T” 16ga
For 1/2″ to 33/32″ (12 mm to 26 mm) tongue and groove flooring.

T16ga

Compatible with Primatech models

  • 250AT, 250FT, 245FT, 240FT, 210FT, 330T, 300T
2″ Box
1,000
Case
10,000
1 ½” Box
1,000
Case
10,000

Stainless steel

Use on ACQ treated materials as well as composite decking or boat building or any applications that require a non-corrosive fastener. These nails meet the specific needs of ACQ Nailing applications.

For 1/2″ to 33/32″ (12 mm to 26 mm) flooring. To be used for special applications where corrosion resistance is required.

“L” 16ga (stainless)
For 1/2″ to 33/32″ (12 mm to 26 mm) tongue and groove flooring.

L16gaStainless

Compatible with Primatech models

  • 250AL, 250FL, 245FL, 240FL, 210FL, 330L, 300L, 100
*2″ L SS Box
1,000
Case
5,000
1 ½” L Box
1,000
Case
5,000

“T” 16ga (stainless)
For 1/2″ to 33/32″ (12 mm to 26 mm) tongue and groove flooring.

T16ga

Compatible with Primatech models

  • 250AT, 250FT, 245FT, 240FT, 210FT, 330T, 300T
*2″ T SS Box
1,000
Case
5,000

“L” 18ga Cleats
For 3/8″ to 3/4″ (8 mm to 19 mm) solid,engineered and some bamboo flooring.

L16ga

Compatible with Primatech models

  • 550AL, 510, 500
1 ¾”  Box
1,200
Case
6,000
1 ½” Box
1,200
Case
6,000
1 ¼” Box
2,000
Case
10,000

Staples

Specifically designed for the application of hardwood flooring.

15,5ga
For 1/2″ to 33/32″ (12 mm to 26 mm) tongue and groove flooring.

S15ga
Staple is coated for lubrication at penetration and for better adhesion when installed.
  • Chisel point for ease of installation
  • Can be used with most Flooring staplers requiring 15 1/2 ga – 1/2″ crown staples

Compatible with Primatech model

  • 250AS, 250FS, 245FS, 240FS (260), 210FS (220)
* 2″ Box
1,000
Case
9,000 
 1 ¾” Box
1,000
Case
9,000
* 1 ½” Box
1,000
Case
9,000

18ga
For 1/4’’ to 5/8’’ (6 to 16mm) tongue and groove flooring.

S15ga
Staple is coated for lubrication at penetration and for better adhesion when installed.
  • Chisel point for ease of installation
  • Can be used with most Flooring staplers requiring 18ga – 1/4″ crown staples

Compatible with Primatech model

  • Q180
1 ½” Box
5,000
Case
30,000
1 ¼” Box
5,000
Case
30,000
1″ Box
5,000
Case
40,000

Glue

G060

g1
G060 PrimStick is a thermoplastic hot melt adhesive designed for a wide variety of applications. It features an instant tack and fast cure time. It is non-toxic, has minimal VOCs, and virtually no smell. The unique formulation enables superior bonding to a variety of porous and non-porous materials. G060 bonds to materials including, but not limited to, wood, concrete, metals, plastics, rubber, corrugate, ceramic, and many others. It is clear in color and has medium open and set time. G060 is available in ½” x 10″ sticks.

Compatible with Primatech model

  • G100
10″ Box
1x1lbs
Case
22 pk
½” Box
1x1lbs
Case
22 pk

G180

g2
G180 PrimStick is a thermoplastic hot melt adhesive designed for a wide variety of applications. It is non-toxic, has minimal VOCs, and virtually no smell. The unique formula enables excellent bonding to a variety of porous and non-porous materials. G180 bonds to materials including, but not limited to, wood, concrete, metals, plastics, rubber, corrugate, ceramic, and many others. It is light yellow in color and has a long open time and set time. G180 has a high heat and cold resistance. It is available in ½” x 10″ sticks.

Compatible with Primatech model

  • G100
10″ Box
1x1lbs
Case
22 pk
½” Box
1x1lbs
Case
22 pk